SHOP FOX M1016 10-Inch by 20-Inch Metal Lathe

$1,509.99 (as of October 6, 2017, 8:42 pm) & FREE Shipping. Details

Cross slide table
11 change gears
2 dead centers

Buy product

Categories: , .


SHOP FOX M1016 Steel Lathe

Shop Fox 10-via-20-Inch Steel Lathe
View larger

4-Means Turret Software Post
View larger

Cross Slide Table
View larger
Shop Fox M1016 10-via-20-Inch Steel Lathe

An superb small-sized lathe with an outstanding nine-3/four-inch swing and a 21-inch distance among facilities, the M1016 offers to hand equipment like five-inch 3-jaw chuck, eye protect, and four-Means turret Software put up. This mini-lathe offers style makers, toolmakers, gun hobbyists and the weekend machinist a solution to economically produce small precision portions, threaded portions, fittings and dies.

5-Inch 3-Jaw Chuck and Turret Software Post

Removing or putting in chucks or faceplates at the M1016 is simple. This Steel lathe includes a spindle nostril mounting machine which makes use of a round lock plate with slotted holes which might be outsized at one finish. While the lockplate is circled counterclockwise the studs with mounting nuts can move throughout the spindle nostril. While the lock plate is circled towards the again of the lathe, the oversize holes slim to the dimensions of the studs, permitting the mounting nuts to be tightened in opposition to the again of the lock plate, therefore, securing the chuck or faceplate. The turret Software put up saves via holding quite a lot of chopping equipment and may also be circled to have the specified chopping Software in place.

Cross Slide Table and Compound Slide

The Pass slide includes a scale at the handwheel that presentations graduations of 1 thousandths of an inch (zero.001-inch) and the compound slide includes a scale that presentations graduations of 1 thousandths of an inch (zero.001-inch). Not like the Pass slide, the compound slide may also be circled to a collection attitude after which it may be moved from side to side alongside the axis of that attitude.

Standard Equipment

5-Inch 3-Jaw chuck, Pass slide table, 11 modification gears, 2 lifeless facilities, four-Means turret Software put up and ahead/reverse transfer with emergency prevent all come same old with the Retailer Fox M1016 Steel lath

Specifications and Features
  • Swing over mattress: nine-3/four-inch
  • Distance among facilities: 21-inches
  • Swing over Pass slide: 6-inches
  • Swing over saddle: 6-inches
  • Cross slide go back and forth: four-1/four-inches
  • Compound go back and forth: 2-1/four-inches
  • Carriage go back and forth: 20-inches
  • Spindle speeds: 6 at 150, 240, 490, 750, 1200 and 2400 RPM
  • Spindle bore: 3/four-inch
  • Spindle taper: MT #3
  • Motor: 3/four HP, 110V, single-section, 8A, 1725 RPM
  • Bed width: five-3/8-inch
  • Tailstock barrel taper: MT #2
  • Tailstock barrel go back and forth: 2-half of-inch
  • Leadscrew: 3/four-inch – 12 TPI
  • Longitudinal feed vary: 2 at 0.half-inch and 0.010-inch
  • Thread vary (inch): 12 at 8-forty TPI (equipment adjustments required)
  • Thread vary (metric): 12 at 0.4 – 3.0mm
  • Maximum Software dimension: half of-via-half of-inch
  • Overall dimensions: 44 period via 23 width via 17-half of-inch peak
  • Approximate delivery weight: 386 lbs.

Pass slide table
11 modification gears
2 lifeless facilities
four-Means turret Software put up
Eye protect

Additional information




EAN List

Item Dimensions





Package Dimensions

Package Quantity

Part Number

Product Group

Product Type Name





UPC List


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.