1792800 Features: -18” variable speed drill press.-PM2800. Assembly Instructions: -Assembly required. Dimensions: -68” H x 23.5” W x 31.5” D, 302 lbs.
Designed with the desires of the pro woodworker in mind, the Powermatic PM2800 18-Inch Variable-Speed Drill Press offers leading edge features other models merely can not match. Built for ultra-unswerving performance, the PM2800 features dual LED work lighting fixtures and a dual laser guide system. Both the expandable work table and motor are the industry’s largest within the PM2800’s class.
Single-care for, variable-speed keep watch over means that you can select your speed with out touching the belt. View larger.
Laser guides allow for precision drilling. View larger.
The expandable surface table supplies as much as 30″ of robust toughen. View larger.
Durable and Versatile
With prime-end castings and ultra-difficult steel components, the PM2800 is as durable as it’s versatile.The 3 and one-eighth-inch diameter steel column, over-sized quill, and solid iron table system providethe rigidity wanted for true accuracy and repeatability. The all solid iron base offers stability,decreases vibrations, and is derived with holes in each and every corner for securing the PM2800 to an acceptable floor.
For improbable versatility, the PM2800 offers a whole 18-inch swing, a spindle-to-base clearance of 47 inches, and a maximum spindle-to-table capacity of 26-1/2 inches.
Powerful One-Horsepower TEFC Motor
The PM2800 comes provided with a heavy-duty one-horsepower, one-Ph, 115-/230-volt, fifteen-/eight-amp,TEFC (completely enclosed fan cooled) motor that is pre-stressed for 115-volt power, but may also be converted to make use of 230 volts.
To make it simple to use all that power, a single-care for, variable-speed keep watch over shall we the user select the speedneeded with out touching the belt. And the 400 to 3,000 RPM spindle speed range supplies additional flexibility.
Lights and Laser for Accuracy
To assist make certain optimum accuracy, the PM2800 boasts a couple of strategically positioned LED work lighting fixtures which can be bright enoughto make seeing layout marks simple, but mounted at the underside of the top to forestall glaring. A simple push-button On/Offswitch means that you can use the LED lighting fixtures simplest when wanted.
A second push-button On/Off switch controls a couple of fully adjustablelasers, aimed to create an “X” at the drill-bit point of entry.
Keyless Chuck and Spindle
For user-friendly operation, the PM2800 has a large two-inch diameter quill with a bunch-two Morse taper for stabilityeven when the use of large bits in difficult woods. There is also a great, keyless, 5/8-inch capacity chuck for effortless bitchanges, and a quill (spindle) assembly with full 4-3/8-inch plunge capacity.
Finger-operated depth stops make it simple tolimit drilling depth for repetitive jobs, whilst three large handles make plunging the spindle simple, even if drilling largeholes in difficult woods.
Expandable Table for Flexibility
Measuring 14.0 x 16.0 inches (W x D), the principle surface table will give you quite a lot of area for larger workpieces.If you wish to have extra space, merely slide the extensions out and the width grows to 30 inches. For extra convenience,the table features twin T-slot grooves for a miter gauge or other homemade jigs. It also tilts to 90-degrees tothe left or right, and may also be locked at any point.
The PM2800 boasts a fence with a couple of flat, extruded aluminum faces that may be opened to extend the overallsupport to 30 inches. Splitting the fence faces also unearths the inlet for the built-in dust collection thatterminates in a two-inch diameter ID port that angles out from the rear of the fence to stay the hose out of the best way.
Dimensions and Warranty Information
The PM2800 measures approximately 23.5 x 68.0 x 31.5 inches (W x H x D), weighs 209 pounds, and is sponsored by a five-year warranty.
What’s within the Box
One column assembly with rack and ring; one head assembly; one base; one table bracket and table; three down-feed handles; one chuck; one waft key; one arbor; one shift knob; one locking care for; all important hardware; manual; and warranty card.
Powered by a heavy duty 1-Horsepower, 1-Segment 115/230-Volt TEFC motor for the massive jobs
Head mounted dual laser guide system supplies a consistent drilling cross point at the work piece
A brand new larger table system with dual extensions for the biggest woodworking table available on the market, features twin T-slot grooves for a miter gauge or other homemade jigs
In-built dual LED work lighting fixtures gets rid of cast shadows
Newly designed tables tilts 90-Degree and has a good stop at 0-Degree