Iglobalbuy 3 in 1 CT312 Multi Functional TIG / MMA / Air Plasma Cutter Welder Welding Machine

Input voltage(V):AC110-220V ± 10% 50/60(sing phase);Protection class:IP21
Input power capacitance(KVA):4.8;Efficiency(%):80;Duty cycle%:60;Insulation class:F
No-load loss(W):40;Power factor:0.93;Cut thickness(mm):1-8;Gas flow(L/min):2-5

Buy product


Current vary(A): TIG- 10-a hundred and twenty; MMA- 10-a hundred and twenty; CUT- 10-30. Rated output current(A): TIG- a hundred and twenty; MMA- a hundred and twenty; CUT- 30 Input current(A): TIG-thirteen; MMA- 22; CUT- 21. No load(V): TIG-fifty five; MMA- fifty five; CUT- 220 Work voltage(V): TIG-14; MMA- 24; CUT- 92. WARNING This apparatus uses prime voltage electric current and produces extraordinarily prime temperatures. Misuse of this machine may lead to hearth, destruction of property, serious harm. SAFETY PRECAUTIONS Slicing might {lead to|cause} hearth and explosion Stay kids away Wear licensed eye Coverage Wear licensed tools, jackets, pants, boots, gloves and the like. Do NOT wear wet or damp apparel Use with correct ventilation Do NOT use close to combustibles or explosives Don’t inhale fumes produced by means of this machine Best use in a space with licensed ventilation Flying sparks might {lead to|cause} hearth and burns Give protection to yourself, others, and the world from flying sparks All the time have a hearth extinguisher nearby Take into account that Slicing on a ceiling or ground can {lead to|cause} hearth at the opposite aspect By no means cut closed containers such as drums or tanks, this may increasingly lead to explosion Connect the bottom cable as with reference to the work as imaginable By no means cut a container with the rest inside of, this would lead to explosion or hearth Blank all subject material before Slicing Don’t cut close to explosive mud or different vapors By no means cut a pressurized pipe, cylinder or vessel. Apply all OSHA and NFAP necessities/laws Check out all connections and cables before and after every use. Don’t use the apparatus if injury is provide. Insulate work clamp while no longer hooked up to the work Flip off apparatus while no longer in use Electrical shock is also fatal By no means touch reside Electrical portions Insulate yourself from the bottom with correct Coverage Do NOT touch the torch’s portions if its in contact with the work or flooring Disconnect the machine from its input Energy provide before servicing, checking or cleaning.
Input voltage(V):AC110-220V ± 10% 50/60(sing section);Coverage elegance:IP21
Input Energy capacitance(KVA):four.8;Potency(%):eighty;Duty cycle%:60;Insulation elegance:F
No-load loss(W):forty;Energy issue:zero.ninety three;Cut thickness(mm):1-8;Gas drift(L/min):2-five
Air pressure(mpa):zero.four;2 Year Guaranty;Item send from US, estimate receiving time 3-7 days.
CT-312 3 in 1 Plasma Cutter/TIG/MMA Welder

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.